React.js tips and tricks

After working full-time with React.js for the past 2 years, I've now been 3 times lead React.js developer at 3 Series A startups. It's been a lot of fun, and after having gotten an early start in 2014, it's great to see it blowing up, growing 300% just in 2015 & 2016.

Below are a few of the higher-level things I've learned along the way, hopefully it'll provide you Denkanstoß (food for thought).

Roll your own

Let's say you want to implement an infinite list in React.js. (let's also assume that infinite lists are a solid UX choice)

You may now choose between

When I faced this quiz, ultimately the right answer turned out to be the last one.

After implementing the first 3 I said "screw it" and decided to roll my own. With 3rd party libraries I kept running into problems such as strange markup choices & style structures that made it hard to style the component in line with existing set of components and with seatgeek's implementation in particular -- persistent performance problems (which I later tracked down to part of their code binding to the onScroll event, firing dozens of times per second)

The interesting distinction here seems to be that while jQuery defines things as changesets, which generally "work well enough", with React.js you have to define the exact state at any point in time. You are tightly bound by React's render cycle and can't simply "bind a few events handlers to make it do that thing when that other thing happens". 

Since the app you're working on will generally develop it's very own look & feel, it can be hard to integrate 3rd party components that generally have been extracted from another codebase with its own idea of how to do HTML5, CSS, JS, React.js, browser compatibility, UX & accessibility in the year 2016.

Especially as you customize the behavior down the line, for complex and oft-used interactions, it makes a lot of sense to bite the bullet and roll your own.

It's been my ambition for some time to push forward a unified UI framework under which React developers can rally to concentrate their efforts. I'm happy to see CloudFlare push forward in this space with cf-ui, and hope that more people will push competitors as well as extensions to it.

Break the rules

React.js docs teach us to avoid forceUpdate

Normally you should try to avoid all uses of forceUpdate() and only read from this.props and this.state in render(). This makes your component “pure” and your application much simpler and more efficient.

But check out Vivian Cromwell's great talk at React.js conf this year. How was her team at Chop able to implement smooth scrolling & updating in a huge infinite list? forceUpdate

Similarly, people will tell you to avoid managing components using this.state anytime you're working with redux.

However, in my experience, this isn't quite right. If some piece of state is specific to a component, and dies with it (i.e. on unmount) feel free to encapsulate it within.

Use data-fetching containers

Check out Michael Chan's and Dan Abramov's great blog posts on this topic:

Presentational and Container Components

Container Components

The gist is, have your representational components (the ones with the markup) be completely unaware of how they get their data, and if their data is even there. This should be handled by a parent component whose job it is to get the data, massage it if necessary, trim it to shape, and finally render the representational component.

React is not a religion

React & Redux generally front-loads a lot of pain.

Wanna have a thing that changes on the page. OK, please define exactly how I should render the entire page under all circumstances.

Want to have a new button? OK, please define a new action identifier, a new action, put the button state into the reducer, as well as the initial state, and now pass the new state through the entire application to where you want it.

Want to have a drag-and-drop interaction? OK, please set aside a day to familiarize yourself with react-dnd and its DragSource, DragLayer, DropTarget & DragDropContext components. Then you can define a collect function that connects the drag source and sets isDragging on the monitor as well as a new ItemType for whatever you want to drag as well as an itemSource which is a plain object with a beginDrag function on it. Now you can use those to instantiate a new DragSource and directly call the class of React component you want to drag around with that.


You can't deny, there's something seductive about jQuery:

<div class="dragon">DRAG ON ME</div>
$('.dragon').draggable({ grid: [ 20, 20 ] }) 

Boom, done!

But if you try getting a React.js component to be draggable along a grid, you'll wind up writing a crazy 800 line react-dnd monstrosity, that is specific to this one drag UX interaction, and that none of your coworkers will ever want to touch.

Not that would have ever done that.


React's core philosophy evolved out of the work Facebook's engineers did on XHP. A PHP extension to help them manage the massive complexity they were dealing with.

As such it only really starts to shine once your project eclipses a certain size & complexity.

What good is beautiful code, thrown away?

Use the best tools


While there is the initial hurdle, immutable.js will make your code easier to reason about, safer to manipulate, and will save hours debugging. Immutable data structures truly are a godsend.


Use webpack, rather than Browserify or requite to pull together your project, react-hot-loader and a plethora of other amazing tools are built on top of it -- it is the way forward.


Combining babel-preset-es2015 and babel-preset-react allows you to combine your React app with ES2015 features such as fat-arrow functions that automatically bind "this", or decorators such as the great pure-render-decorator.


redux-thunk allows you to return thunks rather than action inside actions creators. Inside the thunk (which is basically just a function) you can delay the action, or dispatch depending on certain conditions.

Redux Router

redux-router allows you to keep your react-router state in Redux.

Hot reloading

Hot reloading will make your React development a lot faster: react-transform-boilerplate. It detects which components have changed, and only re-renders those. Rather than waiting 5s for webpack to rebuild your entire project, and waiting for your entire browser to rebuild the site, you get sub-second feedback.

Webpack Dev Server

If you don't fancy Hot Reloading, at least do yourself the favor of using webpack-dev-server. It's been one of those "I wish I had done this sooner" moments for me.


That's it! If you have questions or suggestions for improvement, please do not hesitate to contact me at

ES7 React.js with decorators

After 3 hours of toying with gulp & webpack I've successfully found a beautiful, terse way to make webpack successfully transpile ES6, ES7, JSX. No more gulp streams, the following uses webpack alone.


npm install babel-core --save-dev
npm install babel-loader --save-dev
npm install babel-preset-react --save-dev
npm install babel-preset-es2015 --save-dev

# For stage-0 features
npm install babel-preset-stage-0 --save-dev

# If you want to use decorators
npm install babel-plugin-transform-decorators-legacy --save-dev

Next create a top-level .babelrc. The following was the only preset-order that worked for me.

// .babelrc

    presets: ['react', 'es2015', 'stage-0'],
    plugins: [

And inside your webpack config:

// webpack.config.js

    loaders: [
        test: /.jsx?$/,
        loader: 'babel-loader',
        exclude: /node_modules/,

Note: node_modules are excluded since npm packages are generally already distributed as ES5


Sharing the podium with Windows Phone: Never a good look.

Sharing the podium with Windows Phone: Never a good look.

Say what you will about CoffeeScript. It may -- or may not -- be evil, but as a Python developer I loved its

  • List comprehensions
eat(food) for food in ['toast', 'cheese', 'wine']
  • String interpolation and this shorthand
"My name is #{ @middleName } #{ }."
  • Multi-line strings
  • Existence operators
alert("Peter's car is red!") if peter?.car?.color is 'red'
  • Chained comparisons
healthy = 200 > cholesterol > 60
  • and beautiful, beautiful preference of whitespace over braces.
This is what your React code could look like

This is what your React code could look like

I, too, shall weep a silent tear and teeth-gnawingly join the ranks of ES6.

B̭̥͡r̡͍̞̠̤̜i͖̞̤n͓̩̙̟̳̼̣͡g̤͡ ̦ì͓̜̗n̼̪͕ ṯ͍͖h͎̩͟e̴̬̗ b̠͈͟r̥̤a̶͕͉͔̻̣̥͇ç̯ͅe̼̯ͅș̵̥̳͔̹͔

Upgrading to Django REST Framework 3

A client recently asked me to help them with a ticket

At this point I'd been working with Django and Django REST Framework for years, so thought to myself: Upgrading a 3rd party library from 2to3, easy pickings! Change a few field names and maybe some Serializer method names. I like Serializers. Serializers are cool.

A first

$ pip install -U djangorestframework
$ python runserver

revealed a large amount of assertion errors coming from the DRF 3 source code.

Code like this:

class Field(object):
    def __init__(...):
        # Some combinations of keyword arguments do not make sense.
        assert not (read_only and write_only), NOT_READ_ONLY_WRITE_ONLY
        assert not (read_only and required), NOT_READ_ONLY_REQUIRED
        assert not (required and default is not empty), NOT_REQUIRED_DEFAULT
        assert not (read_only and self.__class__ == Field), USE_READONLYFIELD

was causing errors like

    AssertionError: Instantiate ReadOnlyField instead of Field(read_only=True)


    Field.to_representation() must be implemented.
    If you are upgrading from REST framework version 2
    you might want `ReadOnlyField`

Cool, s/Field/ReadOnlyField/ should take care of that.

Time to set some aggressive estimates:

It wasn't until the next day that I ran the entire test suite:

=========================== short test summary info ============================
 341 failed, 4068 passed, 511 skipped, 2 warnings, 533 error in 993.89 seconds =

Hmm, 341 failed + 533 error.

Wait, how many custom Serializers do we have. 104??!


A week later I was still sitting on 409 failed + 29 error.

This was another beast altogether.

Every code base is unique, but I've compiled a list of ideas that helped me through the process:

  • Read the announcement. You'd think this would be obvious and the announcement actually tells you to read it too, but one thing that would've helped me tremendeously was if it had done so in bold red. Read the page! -- Yes. That is better.
  • Familiarise yourself with the DRF3 source before starting. What exactly do BaseSerializers, Serializers, ModelSerializers do and when do you want to sub-class each one? What's the difference between .data and .validated_data (hint: it's not the validation). How does validation work now anyway? Why does DRF3 not call Model.clean() anymore when de-serializing? Should you instantiate a throw-away in order to runModel(**data).clean() or maybe move the validation code into a more generalised spot? The announcement and DRF3 source code (which is well documented) will help with such questions.
  • Set all the compatibility flags in the beginning and work backwards. DRF3 coerces beautiful native Date, Time, DateTime and Decimal objects into strings in Serializer output ... setting DATETIME_FORMAT, DATE_FORMAT, TIME_FORMAT to None and COERCE_DECIMAL_TO_STRING to False respectively will revert such behaviour.
  • Get to green as quickly as possible. I started working through the test failures on a submodule-by-submodule basis but midway through went rambo and started to leave small optimisations, refactors & cleanups by the way-side and went into hack-mode spraying code and TODO's wherever I went in an effort to "just get to green" on my test build and have a solid basis to work from. After this was done, I also had a better overview of the which problems kept reoccuring and required careful refactoring and which ones were one-offs that could be left as special cases.
  • Leave bugs that confuse you for later. When all of a sudden completely unrelated code starts breaking, it might be a good idea to leave it and focus on the more concrete stuff first. This ties in with Get to green as quickly as possible. Some things are obviously wrong behaviour, while others can simply be a special case that was intended but undocumented, or a new DRF3 behaviour, or an old DRF2 behaviour that's not possible anymore, or a different output format causing something else to behave differently in subtle ways, and so on and so forth.

Here's the example of a create flow for one of the Serializers

You would probably be right to assume that this can and will break in many places if you completely re-architecture the APIs and under-lying philosophies of the code the white and gold blue and purple rows were built upon.

Imagine the CustomAddressField throws a ValidationError. After tracing through the code you find while the value originates in gen_contact_details(), it sometimes gets modified in fill_project_data(), a utility function used widely throughout the 300kLOC code base. What is this mysterious value supposed to be? Searching through the code base some other function tries to cast this value into an int() after calling fill_project_data() but leaves it be incase it can't do it. This means it must be str orint in most cases, maybe a float. Since we're using dynamically typed Python, there's a lot of guess-work involved. Leaving hard-to-debug errors for later gives you more time to get to know your own code base and those of DRF2 and DRF3.

A lot of the time opaque high-level failures will resolve themselves when you get to the more fine-grained tests and are able to quickly pin-point & solve issues at a lower level.

  •  Ration your willpower. Carefully stepping through nested upon nested levels of testing + view + serializer + DRF3 source code is mentally taxing work and I decided to reserve my most productive phases of the day for the heavier mental lifting while picking out easier tasks otherwise. There's no shame in switching to a more pedestrian JavaScript bug late in the day, when the same time tomorrow could also be spent working on something tougher.
  •  Don't be afraid to go against what you see in the DRF3 source. A lot of the implicit behaviors in DRF 2 have been replaced by stricter and more explicit ones in DRF3. I enjoy code-philosophical discourse as much as the next guy, but sometimes re-implementing a bit of woo-woo and magic can be an easier way to keep API consistency than to try and shove a DRF2-grown cactus into a DRF3-shaped pot.

Was it worth it?

For me personally: Yes. While altogether a rather bumpy & long ride, I believe it's often the things we don't enjoy at first that help us grow. Serializers were one of the areas I was less familiar with and I now - quite literally - know every nook and cranny of the small little beasts.

Like other big projects the reasons for upgrading from version 2 to 3 are not quite obvious. Under the hood it's a lot nicer. And there's quite a few goodies. At the same time all this goes against the maxim of "If it ain't broke, don't fix it".

I wonder if there's something about working on large open-source code-bases, where a v3makes developers & maintainers snap and spiral into a we-do-things-like-this-now frenzy because working with the old code day-in-day-out simply becomes too intellectually & aesthetically insulting.




How to rock remote


Remote work compresses your emotions, your subtle hinting, your non-verbal social cues down by a lot.

The question "should I add this to clarify" should almost always be answered with a "yes". There is tremendous value in being terse, but since humans tend to read a lot faster than they write, you can help your team and your clients a lot by providing additional signal. Write, write, write.


Rather than blindly ascribing malintent, it's often more effective to ask specific "why?" questions to get behind people's beliefs and motivations. Listen to what they are saying. And even if what they are saying makes no sense and you feel that urge to interrupt and correct them, don't.

People want to be heard, it makes them feel good. Be that person for others.

Hold your tongue

There will be moments when you feel slighted. Treated unfairly or misunderstood. You'll feel shame and anger.

Especially in the realm of ASCII-communications, sitting in your room with little emotional outlet, this can quickly lead to



an exciting, emotional, or unexpected series of events or set of circumstances

Here are a few of the tricks I use whenever I feel negative emotions coming up:

  1. Walk away. Simply going for walk gives you a nice temporal and physical buffer from saying things you might regret.
  2. Put yourself in their shoes. This as one of the most powerful, there's almost always good reasons why people do the things they do.
  3. Type it and delete it. Type out an email detailing all the ways you think you're being treated unfairly and how everything and everyone sucks, and then delete it.
  4. Make light of the situation. This is one of the heavier ones, but it is tremendously powerful: I assume a nasal voice and say to myself: "Aww, poor little Dominik, he gets to work for an awesome startup with the tech he loves to use and from wherever he wants. And now he has to put up with a little bit of negative emotions.... Aww, what a poor little Dominik". This almost always causes me to crack up.
  5. See the bigger picture. Whenever I navigate a tricky situation like this, I pat myself on the back. Change comes slowly but every positive interaction puts me further on track to becoming the person I want to be.

Turn up the volume

Hey, this article is about rocking remote right?

No more having to be sensitive towards the people in your office!

So turn up the speakers, blast some music, do a little dance after your tests pass and scream out the window Flogsta-style for the sheer joy of it:

Trick yourself

Working in an office can make starting tasks easier: There is a cost associated with being seen bumming around on reddit.

In order to create the same social pressure for myself I've used in the past. Even 3 people watching you code makes it all that more important.

Another trick is to pick a tiny part, i.e. just throwing up the markup with no functionality. Once you're in flow, doing the actual work will seem like the most natural thing.

Have one on the back-burner

Since asynchronous communication sometimes means having to wait, I always try to have a small, independent task stored away. This might be filling out a test suite, improving documentation, or investigating an edge-case bug.

A great way to handle this is to never run into it. When taking on a new task, explore in your mind the tree of eventualities and bring them up before starting. Asking even the improbable will give you a better understanding of what your client / boss, has in mind.

Be like water

Look around you, your monitor, your laptop, your desk, your shoes. All are products of collaboration between thousands of people.

Producing the cleanest, highest-quality code is a great goal. I strive for it every day.

But coming into a new project I try to leave my preconceived notions about how things "should be done" at the door. Especially in terms of coding style, there a lot of arguments every which way. What matters more is to assimilate to the current way of things, in order to reduce friction and so you can all pull into one direction.

Your work area matters

I use a standing desk with a standing mat to reduce strain, a Kinesis Advantage, a 2560x1440 monitor lifted to just below eye level, and all this next to a large window so I get as much sunlight as possible. I clear stuff off my desk as quickly as I can.

Working out of coffee shops, or while traveling is certainly possible. But every little decision, every distraction takes away from willpower that I could dedicate to the project I'm working on.

Keep a schedule

I probably have the best ideas in the shower, yet, despite the drive to work on a project 24/7 I've found the best results when I work a normal day's schedule. Get up early, make coffee, put on nice clothes, make the bed. Go for a walk to get those 20 minutes of direct sunlight exposure. End the day at a reasonable time.

Hacking away at 2am is fun, but every minute spent in that twilight zone removes you a bit further from normal people working a 9-5 and makes socializing harder than it already is. Grabbing a beer with friends at 6pm when you've starting working at 12? Preposterous.

Schedule one-on-ones

Goals, priorities, targets can change quickly, especially in startups. Make sure to schedule regular 1-on-1s with your boss (really push for them). You are helping them by relieving them of the burden of herding all their developers.

But isn’t one of the signs of a well-working team that they require little communication?

If you're absolutely sure that there's nothing to talk about, go ahead. But if you aren't, talk anyway, you would be surprised the little things that come up, and the nuances in communication you can convey via tone of voice.

No faking

Whereas in an office environment you can come to work hung-over and spend 8 hours chair-bound and you're unlikely to be caught out for it.

That quickly stops working with remote work. You are your results, especially as a freelancer. If you feel you aren't doing your best work, it's a good idea to bill fewer hours (e.g. bill 6 for 8 worked). Under-promise, over-deliver.

Have fun

Share as much as you can with your co-workers. Funny stories, stupid mistakes, lessons learnt, interesting articles. This attitude of personal vulnerability (not everyone's perfect) and extroversion (positive, but maybe shallow connection) creates an open & trusting space that others want to be in. 

7 Python Libraries you should know about

In my years of programming in Python and roaming around GitHub's Explore section, I've come across a few libraries that stood out to me as being particularly enjoyable to use. This blog post is an attempt to further spread that knowledge.

I decided to exclude awesome libraries like requests, SQLAlchemy, Flask, fabricetc. because I think they're already pretty "main-stream". If you know what you're trying to do, it's almost guaranteed that you'll stumble over the aforementioned. This is a list of libraries that in my opinion should be better known, but aren't.

1. pyquery (with lxml)

pip install pyquery

For parsing HTML in Python, Beautiful Soup is oft recommended and it does a great job. It sports a good pythonic API and it's easy to find introductory guides on the web. All is good in parsing-land .. until you want to parse more than a dozen documents at a time and immediately run head-first into performance problems. It's - simply put - very, very slow.

Just how slow? Check out this chart from the excellent Python HTML Parser comparison Ian Bicking compiled in 2008

What immediately stands out is how fast lxml is. Compared to Beautiful Soup, the lxml docs are pretty sparse and that's what originally kept me from adopting this mustang of a parsing library. lxml is pretty clunky to use. Yeah you can learn and use Xpath or cssselect to select specific elements out of the tree and it becomes kind of tolerable. But once you've selected the elements that you actually want to get, you have to navigate the labyrinth of attributes lxml exposes, some containing the bits you want to get at, but the vast majority just returning None. This becomes easier after a couple dozen uses but it remains unintuitive.

So either slow and easy to use or fast and hard to use, right?


Enter PyQuery

Oh PyQuery you beautiful seductress:

from pyquery import PyQuery
page = PyQuery(some_html)

last_red_anchor = page('#container >')

Easy as pie. It's ever-beloved jQuery but in Python!

There are some gotchas, like for example that PyQuery, like jQuery, exposes its internals upon iteration, forcing you to re-wrap:

for paragraph in page('#container > p'):
    paragraph = PyQuery(paragraph)
    text = paragraph.text()

That's a wart the PyQuery creators ported over from jQuery (where they'd fix it if it didn't break compatability). Understandable but still unfortunate for such a great library.

2. dateutil

pip install python-dateutil

Handling dates is a pain. Thank god dateutil exists. I won't even go near parsing dates without trying dateutil.parser first:

from dateutil.parser import parse

>>> parse('Mon, 11 Jul 2011 10:01:56 +0200 (CEST)')
datetime.datetime(2011, 7, 11, 10, 1, 56, tzinfo=tzlocal())

# fuzzy ignores unknown tokens

>>> s = """Today is 25 of September of 2003, exactly
...        at 10:49:41 with timezone -03:00."""
>>> parse(s, fuzzy=True)
datetime.datetime(2003, 9, 25, 10, 49, 41,
                  tzinfo=tzoffset(None, -10800))

Another thing that dateutil does for you, that would be a total pain to do manually, is recurrence:

>>> list(rrule(DAILY, count=3, byweekday=(TU,TH),
...            dtstart=datetime(2007,1,1)))
[datetime.datetime(2007, 1, 2, 0, 0),
 datetime.datetime(2007, 1, 4, 0, 0),
 datetime.datetime(2007, 1, 9, 0, 0)]

3. fuzzywuzzy

pip install fuzzywuzzy

fuzzywuzzy allows you to do fuzzy comparison on wuzzes strings. This has a whole host of use cases and is especially nice when you have to deal with human-generated data.

Consider the following code that uses the Levenshtein distance comparing some user input to an array of possible choices.

from Levenshtein import distance

countries = ['Canada', 'Antarctica', 'Togo', ...]

def choose_least_distant(element, choices):
    'Return the one element of choices that is most similar to element'
    return min(choices, key=lambda s: distance(element, s))

user_input = 'canaderp'
choose_least_distant(user_input, countries)
>>> 'Canada'

This is all nice and dandy but we can do better. The ocean of 3rd party libs in Python is so vast, that in most cases we can just import something and be on our way:

from fuzzywuzzy import process

process.extractOne("canaderp", countries)
>>> ("Canada", 97)

More has been written about fuzzywuzzy here.

4. watchdog

pip install watchdog

watchdog is a Python API and shell utilities to monitor file system events. This means you can watch some directory and define a "push-based" system. Watchdog supports all kinds of problems. A solid piece of engineering that does it much better than the 5 or so libraries I tried before finding out about it.

5. sh

pip install sh

sh allows you to call any program as if it were a function:

from sh import git, ls, wc

# checkout master branch

# print(the contents of this directory

# get the longest line of this file
longest_line = wc(__file__, "-L")

6. pattern

pip install pattern

This behemoth of a library advertises itself quite modestly:

Pattern is a web mining module for the Python programming language.

... that does Data MiningNatural Language ProcessingMachine Learning and Network Analysis all in one. I myself yet have to play with it but a friend's verdict was very positive.


pip install

When I first learned Python os.path was my least favorite part of the stdlib.

Even something as simple as creating a list of files in a directory turned out to be grating:

import os

some_dir = '/some_dir'
files = []

for f in os.listdir(some_dir):
    files.append(os.path.joinpath(some_dir, f))

That listdir is in os and not os.path is unfortunate and unexpected and one would really hope for more from such a prominent module. And then all this manual fiddling for what really should be as simple as possible.

But with the power of path, handling file paths becomes fun again:

from path import path

some_dir = path('/some_dir')

files = some_dir.files()


Other goodies include:

>>> path('/').owner

>>> path('a/b/c').splitall()
[path(''), 'a', 'b', 'c']

# overriding __div__
>>> path('a') / 'b' / 'c'

>>> path('ab/c').relpathto('ab/d/f')

Best part of it all? path subclasses Python's str so you can use it completely guilt-free without constantly being forced to cast it to str and worrying about libraries that checkisinstance(s, basestring) (or even worse isinstance(s, str)).

That's it! I hope I was able to introduce you to some libraries you didn't know before.